Panasonic PVDV401D PVDV201 User Guide - Page 63
Using Tape Image Data, PHOTOVU LINK/Movie, Messenger, To capture Still images
View all Panasonic PVDV401D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Transferring Your Images (i.LINK) Using Tape Image Data (PHOTOVU LINK/Movie Messenger) By connecting the Palmcorder and PC with the DV Interface Cable (i.LINK), you can transfer Motion images and still images saved on the DV Tape directly to your PC. Note • If PHOTOVU LINK/Movie Messenger does not work, please refer to page 62. 3STILL CAPTURE 3MOVIE 2 CAPTURE PLAY Button Before you begin • Insert a recorded Tape. (See page 9.) • Make Palmcorder-PC connections. (See page 62.) • Turn your PC on. • Set Palmcorder POWER to VCR. • Run the Software after the DV Interface Cable (i.LINK) has been connected to the Palmcorder. 1Repeat steps 1~4 on page 57 to run the PHOTOVU LINK/Movie Messenger. Note • When the DV Interface Cable (i.LINK) is connected, the input display will automatically become DV. If it is not DV, please confirm the connection. 2 Then, close and restart the software. Click PLAY button on PC screen to playback the DV tape. • Please use the LCD monitor on the Palmcorder or PC screen for confirmation. To capture Motion images 3Click on [MOVIE CAPTURE] at the point you wish to capture a Motion image. Click on [STOP] to end capture. • The image is recorded to the PC in real time. • The maximum capture time is approx. 3 minutes. • When capturing data containing changes between 12 bit and 16 bit and/or between SP and LP mode, a separate file will be made for each mode. • Please refer to pages 59~61 for other functions. To capture Still images 3Click on [STILL CAPTURE] at the point you wish to capture an image. • Repeat step 3 to continue capturing images. • Captured Still images are saved to the PC, and you can playback the saved images on the Image Browser. SSppeecciiaall FFeeaattuurreess 63