Panasonic PVDV401D PVDV201 User Guide - Page 58
Using Tape Image Data, PHOTOVU LINK/Movie, Messenger USB
View all Panasonic PVDV401D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Transferring Your Immaagges Using Tape Image Data (PHOTOVU LINK/Movie Messenger) (USB) By connecting the Palmcorder and PC with the USB Cable, you can transfer Motion images and Still images saved on the DV Tape directly to your PC. Before you begin • Insert a recorded tape. (See page 9.) • Make Palmcorder-PC connections. (See page 54.) • Turn your PC on. (See page 54.) • Set Palmcorder POWER to VCR. 1Repeat steps 1~4 on page 57 to run the PHOTOVU LINK/Movie Messenger. Note • When the USB Cable is connected, the input display will automatically become USB. If it is not USB, please confirm the connection. Then, close 2 and restart the software. Click (PLAY) on PC screen to playback the DV tape. • The playback screen cannot be viewed on the PC. Please use the 3STILL LCD monitor on the Palmcorder for confirmation. CAPTURE To capture Motion images 3MOVIE 2 CAPTURE PLAY Button 3Click on [MOVIE CAPTURE] at the start point you wish to capture a Motion 4image. Click [MOVIE CAPTURE] or [STOP] to end capture. • "Now Searching" is displayed. • The DV Tape is rewound to the point at which the capture was started. The To capture Still images 3Click on [STILL CAPTURE] at the point Motion image is then transferred to the PC. • "Data transfer is now in progress" is displayed on the PC screen. you wish to capture an image. • Repeat step 3 to continue capturing images. • Captured Still images are saved to the PC, and you can playback the saved images on the Image Browser. (See page 59.) • The maximum capture time is approx. 30 seconds. Capture stops automatically at the end of 30 seconds. Note • Motion images cannot be captured if data contains the following... • A change between 12 bit and 16 bit. • A change between SP and LP mode. • During transfer to the PC, the Motion images will not be displayed on the PC screen. • Transfer takes from about 30 to 50 seconds for every 1 second of the Motion image. 5To capture other Motion images, repeat steps 3~4. 58 For assistance, please call : 1-800-211-PANA(7262) or send e -mail to : [email protected]