Panasonic PVDV401D PVDV201 User Guide - Page 38

Cardd FFeeaattuurreess Photo Title You can record PhotoShot images from a Memory Card to a cassette to be used as a WIPE or MIX effect. Note When Photo Title is set to ON, the selected image and Title will appear before each recording is made. WIPE : The Photo title is replaced with the current scene in a wiping motion. Before you begin • Connect the Palmcorder to a power source. (See pages 11, 12.) • Set POWER to OFF before inserting a recorded Memory Card. (See pages 32, 33.) 1 Set POWER to CAMERA. • The POWER lamp lights red. • Be sure POWER is fully turned to 2 CAMERA position. Press MENU to display the CAMERA menu screen. Then rotate and press JOG KEY to select PHOTO TITLE . 3 MIX : The photo title is replaced with the Rotate and press JOG KEY to select current scene in a gradual mixing and set MODE and then TITLE . effect. 1st : Select and set MODE (WIPE or MIX). 2nd : Select and set TITLE to "SET". 2, 3, 4JOG KEY • "PLEASE WAIT" appears on-screen. • The Multi image screen is displayed. 2MENU Button 5REC/PAUSE Button 38 1POWER Switch 4 Rotate and press JOG KEY to select and set an image. • "PLEASE WAIT" is displayed while image is processed. Then, "PHOTO TITLE SET" is displayed for approx. 3 seconds, and the screen goes back to the Camera mode screen. • After Photo Title is performed, Digital Function turns off. 5 • There are 12 pre-installed files. Press REC/PAUSE to start recording with Photo Title. • WIPE or MIX screen is displayed at beginning of the recording. Then the Photo Title setting will be cleared automatically. For assistance, please call : 1-800-211-PANA(7262) or send e -mail to : [email protected]