Panasonic PVDV401D PVDV201 User Guide - Page 39

SSppeecciiaall FFeeaattuurreess SSppeecciiaall FFeeaattuurreess Dual Digital Electronic Image Stabilization System (D.E.I.S.) This feature helps compensate for any unintentional hand or body movement. It can be used in both the Recording and Playback (VCR) modes. EIS NORMAL EIS ON 1, A POWER Switch 3REC/PAUSE Button 2, 4, C, D EIS Button BPLAY Button Note • Other Digital Functions are turned off automatically when the EIS and Digital Zoom are selected. CAMERA mode 1 Set POWER to CAMERA. • The POWER lamp lights red. • Be sure POWER is fully turned to 2 CAMERA position. Press EIS to stabilize the picture. • Picture flicker may be observed when taping under fluorescent lighting conditions. • The EIS indicator flashes when the light level is inadequate. • Turn D.E.I.S. OFF during recording 3 when using a tripod. Press REC/PAUSE to start recording. 4 Press EIS again to cancel. • Be sure that D.E.I.S. is turned off when not needed. D.E.I.S. may not function when... • Palmcorder movement is too extreme. • Recording a subject with distinct horizontal or vertical stripes. • Recording in low light situations. • Recording a subject under a great amount of fluorescent light. • Recording a scene with very fast motions. VCR mode A Set POWER to VCR. • The POWER lamp lights red. • Be sure POWER is fully turned to VCR position. B Press PLAY to start playback. C Press EIS to stabilize the picture. D Press EIS again to cancel. • Be sure that D.E.I.S. is turned off when not needed. Note • When using D.E.I.S in VCR mode, the image size is slightly larger. 39