Panasonic PVL751 PVL751 User Guide - Page 10

Supplying Power Battery Care Caution: • Charge only with specified charger. • Battery can be charged within a temperature range of 10 °C (50 °F) and 35 °C (95 °F). • Battery is normally warm after charging or just after use. • Do not use an insufficiently charged or worn-out Battery. To avoid Battery damage: • Do not drop or jar Battery. • Use Battery with specified units only. • If Battery is used in extremely high temperatures, a safety device will automatically prevent operation. Safety precautions: • Do not get Battery near, or dispose of in fire. • Do not directly connect (short circuit) the positive (+) and negative (-) terminals. • Never attempt to disassemble or reassemble Battery. To prolong Battery life: • While not in use, remove Battery from the Camcorder and AC Adaptor and store in a cool, dark, dry place. • Keep Battery terminals clean. RBRC RBRC U.S.A. CONSUMERS: ATTENTION: The product you have purchased is powered by a nickel cadmium battery which is recyclable. At the end of its useful life, under various state and local laws, it is illegal to dispose of this battery into your municipal waste stream. Ni-Cd Please call 1-800-8-BATTERY for information on how to recycle this battery. AC Adaptor Car Battery Cord (Optional) DC Power Cable POWER Lamp Cigarette Lighter Socket (12 V) DC IN Connector DC IN Connector VCR DC OUT Connector 1 Connect AC Adaptor VCR DC OUT to Camcorder DC IN with supplied DC Power Cable. 2 Plug in AC Adaptor. POWER Lamp lights. Note: • While the DC Power Cable (supplied) is connected to the AC Adaptor, the Battery cannot be charged. • When not in use, unplug AC Adaptor from AC outlet. (Adaptor uses 1.2 W of electricity while plugged in.) CAUTION: This unit will operate on 110/120/220/240 V AC. An AC plug adaptor may be required for voltages other than 120 V AC. Please contact either a local or foreign electrical parts distributor for assistance in selecting an alternate AC plug. We recommend using the accessory power plug adaptor (VJSS0070) in an area which has special AC outlets. Car Battery Cord (optional) Cigarette Lighter Plug 1 Connect PV-C16 Car Battery Cord (optional) to Camcorder DC IN. 2 A Start engine first. B Plug Car Battery Cord into Cigarette lighter socket. • If Car Battery cord fuse needs replacing, use exact current rating (in amps). Note: • This cord only works in vehicles equipped with DC 12 V (negative ground) battery. Check with your car/ truck dealer. Use only specified car battery cord. • To avoid blowing the car battery cord fuse, do step 2 in the proper order. • Running vehicles must be well ventilated. • When not in use, disconnect cigarette lighter plug. 10 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]