Panasonic PVL751 PVL751 User Guide - Page 36

Digital Still Camera Before you begin... • Connect Camcorder to power source. • Insert the CompactFlash Card (page 34). • Set POWER to PHOTO. LIGHT ON OFF AUTO Using the Light For capture of still images in dim lighting. Set LIGHT to AUTO. When RECORD/PAUSE is pressed to capture an image in dim lighting, the Light comes on for about 2 seconds, the image is captured, then the light goes out. Or, set LIGHT to ON/OFF manually. (See page 15 for further details.) Playback 1 2 PLAY REC PHOTO 3, 4 1 Press LCD-OPEN and swing LCD monitor fully open. Adjust viewing angle. 2 Slide PHOTO MODE to PLAY. 1 2 3 The Multi Image Playback screen 4 5 6 appears. The last captured image SELECT : PUSH -/+ KEY SET : PUSH PLAY KEY DELETE : PUSH DEL KEY screen is underlined. • If there are no recordings on the card, STILL DEL "NO PICTURE" appears on-screen. • In NORMAL or FINE mode, the color PLAY of the Multi Image page number is as follows: REW FF + STOP Note: • If CompactFlash Card is not inserted, "NO CF CARD" appears on-screen. Set Power to OFF, then insert the CompactFlash Card. • Pictures captured with other brand products cannot be used with this Camcorder. • If "INCOMPATIBLE IMAGE" appears onscreen, the size of the captured image cannot be played back on this Camcorder. • Do not change POWER setting to CAMERA or change recording mode while "PLEASE WAIT" is displayed. • If "CF CARD ERROR" appears on-screen, see page 56. NORMAL mode green FINE mode white 3 Press + (FF) next. Press - (REW) previous. • The selected image will be underlined in green. • Continue pressing + (FF) or - (REW) for next or previous page. 4 Press PLAY to 002 FINE PHOTO display image. This screen appears PLEASE WAIT followed by image. SELECT : PUSH -/+ KEY MULTI : PUSH STOP KEY • Press DISPLAY to remove or redisplay this screen. • Press STOP to redisplay Multi Image playback screen. 36 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]