Panasonic PVL751 PVL751 User Guide - Page 18

Camera Recording Programmed Recording Set a recording start and stop time. Or, set a 5 or 10 second interval recording to be done each minute. Before you begin... • Connect Camcorder to power source. Use AC Adaptor for longer recordings. • Insert cassette with record tab (page 11). • Set POWER to CAMERA. FAR UP FOCUS DOWN NEAR DISPLAY MENU 1, 2, 3 REC TIME : 4 PHOTO VCR OFF CAMERA *1 Record 5 seconds each minute. *2 Record 10 seconds each minute. 1 Press MENU for MENU mode. Press UP v or DOWN w to select PROGRAMMED REC . 2 Press DISPLAY. (Current time is displayed.) Each additional press of DISPLAY increases start time by 30 minutes. - - - MENU - - - PAGE 1/2 PROGRAMMED REC T I TLE ; AUTO/MANUAL SHUTTER ; AUTO STAND-BY RELEASE ; OFF CLOCK SET w SELECT : PUSH w/v KEY SET : PUSH DISPLAY KEY END : PUSH MENU KEY START ; 10 : 20PM REC TIME ; 10MIN. SELECT : PUSH w/v KEY SET : PUSH DISPLAY KEY START : PUSH RECORD KEY CANCEL: PUSH MENU KEY 10:20:00PM 3 Press DOWN w to select REC TIME . Press DISPLAY repeatedly to select one of the options shown at left. START ; 10 : 20PM REC TIME ; 10MIN. SELECT : PUSH w/v KEY SET : PUSH DISPLAY KEY START : PUSH RECORD KEY CANCEL: PUSH MENU KEY 10:20:00PM To cancel the setup, press MENU twice. 4 Press RECORD/PAUSE to place Camcorder in stand-by mode. STAND-BY START ; 10:20PM REC TIME ; 10MIN. 10:20:00PM JUN 1 2001 Recording will be done as scheduled. Note: • Start time may not be set over 24 hours from current time. • Camcorder shuts off at tape end, or 12 hours after Interval Recording starts. • To cancel, set POWER to OFF. 18 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]