Panasonic PVL751 PVL751 User Guide - Page 29

Digital Zoom Power Zoom magnification is digitally increased. Before you begin... • Connect Camcorder to power source. • Set POWER to CAMERA. TW 3 1 2, 4 50× D.ZOOM1 Note: • If "NOW IN DIGITAL WIPE" is displayed when D. ZOOM is pressed, DIGITAL SELECT is currently in DIGITAL WIPE mode and the DIGITAL ZOOM feature is not available. 1 Slide DIGITAL SELECT to D.ZOOM. 2 Press D. ZOOM. once ©D.ZOOM 1 (150× maximum) twice ©D.ZOOM 2 (300× maximum) The Higher digital magnification levels may cause picture distortion. 3 Hold down "T" on POWER ZOOM. Digital Zoom starts when normal zoom reaches maximum (26×). • Zoom level appears in EVF or LCD monitor. • POWER ZOOM switch controls digital zoom level. • Normal zoom resumes when level falls to 26×. 4 Press D. ZOOM to turn off Digital Zoom so no indication appears. Special Features Digital Electronic Image Stabilization (E.I.S.) Helps stabilize picture when recording in Before you begin... unstable situations. • Connect Camcorder to power source. • Set POWER to CAMERA. 1 2, 3 EIS 1 Slide DIGITAL SELECT to EIS. 2 Press EIS to display "EIS" in the EVF or LCD monitor. • Image becomes slightly enlarged and shutter speed auto-adjusts from 1/80 to 1/350 according to brightness. • Use High Speed Shutter (page 25) if needed. Shutter speed setting remains after EIS is canceled. 3 Press EIS again to cancel when not in use. NORMAL Digital EIS ON Note: • If "NOW IN DIGITAL WIPE" is displayed when EIS is pressed, DIGITAL SELECT is currently in DIGITAL WIPE mode and the Digital E.I.S. feature is not available. E.I.S. may not function during... • extreme Camcorder movement. • recording of subjects with distinct horizontal or vertical stripes. • low light situations (EIS indicator flashes). • intense fluorescent lighting situations. • recording of very fast motion. 29