Panasonic PVL751 PVL751 User Guide - Page 39

Digital Still Camera Special Features Picture in Picture Wipe Title Captured still images (page 35) can be recorded along with the current picture. Before you begin... • Connect Camcorder to power source. • Insert the CompactFlash Card (page 34). • Set POWER to CAMERA. Moving Picture 1 MODE P - P Still image SP P20 Multi image playback page number STILL DEL PLAY REW FF + STOP 2 3 PHOTO VCR OFF CAMERA ( P - P = Picture in Picture ) 1 Set DIGITAL SELECT to DIGITAL WIPE. • A still image captured on the CF card and the Multi image playback page number is displayed on the right side of the screen. • If there are no recordings on the card, "NO PICTURE" appears onscreen. 2 Press + (FF) or - (REW) to select still image to be used. 3 Start recording (page 16). • When recording starts, Multi image playback number disappears. Then the captured still images can be recorded along with the current picture. • To exit from the Picture in Picture Wipe title mode, press MODE (page 40). Note: • If CompactFlash Card is not inserted, "NO CF CARD" appears on-screen. Set Power to OFF, then insert the CompactFlash Card. • Pictures captured with other brand products cannot be used with this Camcorder. • If "INCOMPATIBLE IMAGE" appears onscreen, the size of the captured image cannot be played back on this Camcorder. • If "CF CARD ERROR" appears on-screen, see page 56. • If Picture in Picture Wipe Title is selected, the following functions are not available: Security mode, Auto Fade, Digital Fade, Digital Filter, Digital Zoom, Digital E.I.S., Still/Strobe/Wide. 39