Panasonic PVL751 PVL751 User Guide - Page 40

Digital Still Camera Digital Wipe Mode Insert a captured still image into the current recording, or vice versa, in one of three wipe effects. Before you begin... • Connect Camcorder to power source. • Insert the CompactFlash Card (page 34). • Set POWER to CAMERA. 23 MODE P-P P-P SP WIPE 1 P20 WIPE 2 WIPE 3 START (first press) WIPE 1 WIPE 2 (Current Recording) WIPE 3 (Captured image) START (second press) WIPE 1 WIPE 2 (Captured image) WIPE 3 1 Repeat steps 1 and 2 on page 39 to set Picture in Picture Wipe title. 2 Press MODE repeatedly for Wipe effect 1, 2, or 3 (See left). • WIPE 1 will flash for a while to store the image for the wipe. 3 Press START: once © inserts captured image. twice © inserts current recording picture. • You can freeze the wipe in progress by pressing START. Press START again to resume wipe. Note: • If CompactFlash Card is not inserted, "NO CF CARD" appears on-screen. Set Power to OFF, then insert the CompactFlash Card. • Pictures captured with other brand products cannot be used with this Camcorder. • If "INCOMPATIBLE IMAGE" appears onscreen, the size of the captured image cannot be played back on this Camcorder. • If "CF CARD ERROR" appears on-screen, see page 56. • If Digital Wipe mode is selected, the following functions are not available: Security Mode, Auto Fade, Digital Fade, Digital Filter, Digital Zoom, Digital E.I.S., Still/Strobe/Wide. (Current Recording) 40 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]