Panasonic TH-65PF12EK User Manual - Page 48
Colour system / Panasonic Auto, Cinema reality, XGA Mode
View all Panasonic TH-65PF12EK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Setup for Input Signals Colour system / Panasonic Auto Select Signal from the "Setup" menu during AV(S Video) input signal. ("Signal [AV]" menu is displayed.) Press to select the "Colour system" or "Panasonic Auto". Signal [ AV ] Press to select each functions. 3D Y/C Filter (NTSC) On Colour system Auto Cinema reality Off Panasonic Auto (4 : 3) 4 : 3 Noise reduction Off If the picture image becomes unstable: With the system set on Auto, under conditions of low level or noisy input signals the image may in rare cases become unstable. Should this occur, set the system to match the format of the input signal. Mode Colour system Function Set the colour system to match the input signal. When selecting "Auto", the Colour system is automatically selected from NTSC/PAL/SECAM, however, M.NTSC signal is not displayed properly depending on the attached terminal board. To display M.NTSC signal, select "M.NTSC" in Colour system. To display PAL60 signal, select "PAL" when BNC Dual Video Terminal Board (TY-FB9BD) is used. For other Video Terminal Boards, select "M.NTSC". Auto PAL SECAM M.NTSC NTSC Panasonic Auto Set to "4 : 3" to view 4:3 images in an unchanged format when Panasonic Auto is selected. (4 : 3) If you would like to view 4:3 images in Just format, set to "Just". Note: Panasonic Auto does not function when BNC Dual Video Terminal Board (TY-FB9BD) is used. Cinema reality Cinema reality: When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which are recorded at 24 frames per second. If the picture is not stable, turn the setting to off. Note: When On, this setting only affects the following signal input: • NTSC / PAL signal input during "AV (S Video)" input signal. • 525i (480i), 625i (575i), 1125 (1080) / 60i signal input during "Component" input signal. Press to select Cinema reality. Press to set On / Off. Cinema reality Off XGA Mode This menu is displayed when the input signal is analog (Component/PC). This unit supports three types of XGA signals with 60Hz vertical frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz, 1,280 × 768 @ 60Hz and 1,366 × 768 @ 60Hz). Press to select "XGA Mode". y XGA Mode Auto Press to select "Auto", "1024×768", "1280×768" , "1366×768". Auto: Automatically selected from 1024×768/1280×768/1366×768. Switch the setting to suit the input signal for better display depends on the angle of view or display resolution condition. Note: After making this setting, be sure to make each adjustment (such as "Auto Setup") on the "Pos. /Size" menu as necessary. (see page 23) 48