Panasonic TH-65PF12EK User Manual - Page 51
Network Setup
View all Panasonic TH-65PF12EK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Network Setup Make the various settings to use the network function. Setup 2/2 MULTI DISPLAY Setup MULTI PIP Setup Portrait Setup Set up TIMER PRESENT TIME Setup Network Setup Display orientation Landscape Network Setup Save DHCP IP address Subnet mask Gateway Port LAN Speed Network ID Control I/F Select MAC address Off 192.168. 0. 8 255.255.255. 0 192.168. 0. 1 1024 Auto 0 232C DHCP, IP address, Subnet mask, and Gateway settings 1 Set DHCP. When "Off" is selected, IP address and other settings can be set manually. 2 Select the item and press . 3 Enter an address. IP address I192.168. 0. 8 1 Use to select a digit. 2 Use to change a number. 3 Press . Pressing 4 Select "Save" and press . Port setting 1 Select "Port" and press . 2 Enter a port number. Port I01024 1 Use 2 Use 3 Press will cancel the address change. to select a digit. to change a number. . Pressing will cancel the port number change. Save Save the current network Setup. Each value set for DHCP, IP address, Subnet mask, and Gateway will be saved. If "NG" is displayed, check the same IP address is not used within the same network. Port Set the port number used for command control. The available setting range is 1024 - 65535. When the PJLink™ protocol is used, the port setting is not necessary. DHCP (DHCP client function) To obtain an IP address automatically using a DHCP server, set this to "On". If DHCP server is not used, set this to "Off". LAN Speed Set the connection speed of the LAN environment. Select the value from Auto, 10 Half, 10 Full, 100 Half or 100 Full. IP address (IP address display and setting) Enter an IP address if DHCP server is not used. Subnet mask (Subnet mask display and setting) Enter a subnet mask if DHCP server is not used. Gateway (Gateway address display and setting) Enter a gateway address if DHCP server is not used. Network ID Set the ID to identify this unit. The available setting range is 0 - 99. Control I/F Select Set whether to control with RS-232C (serial) or LAN. When "LAN" is set, power indicator is lit orange when the slot power is turned on, then the power is turned "Off" with remote control (stand-by state) regardless of the "Slot power" setting. (see page 54) MAC address Display the MAC address of this unit. However, the MAC address is not displayed when the "Control I/F Select" is set to "RS-232C". Notes: • To use a DHCP server, make sure the DHCP server is started. • Contact your network administrator for details on settings. 51