Pentax S7 Operation Manual - Page 92

Shutter release button MENU Four-way controller MENU button Rec. Mode Recorded Pixels Quality Level White Balance AF Setting AE Metering Sensitivity 7M AWB Auto MENU Exit Taking Pictures Setting the Sensitivity You can select the sensitivity to suit the brightness of the surroundings. Sensitivity 4 Auto Flash does not discharge: Automatically set in a range from 50 to 200. Flash discharges: Automatically set in a range from 50 to 400. 50 • The lower the sensitivity (the lower values), the sharper the image and 100 the less noise. The shutter speed will be slower in low light conditions. • The higher the sensitivity (the higher values), the faster the shutter 200 speed in low light conditions to reduce camera shake, but the image 400 may be affected by noise. 1 Press the MENU button in Capture mode. The [A Rec.Mode] menu appears. 2 Use the four-way controller (23) Rec. Mode to select [Sensitivity]. Recorded Pixels 7M 3 Press the four-way controller (5). Quality Level White Balance AWB The pull-down menu appears. AF Setting AE Metering Sensitivity Auto MENU Exit 4 Use the four-way controller (23) Rec. Mode to change the sensitivity. Recorded Pixels 7M 5 Press the shutter release button Quality Level Auto White Balance A5W0B halfway. AF Setting 100 AE Metering 200 The camera is ready to take the picture. Sensitivity A4u0t0o MENU Cancel OK OK Saving the Sensitivity 1p.102 You can select 800 or 1600 for Sensitivity in Blur reduction mode. When auto is set, the Sensitivity is set automatically in a range from 90 50 to 1600.