Pioneer AVHP5700DVD Owner's Manual - Page 25

Tuner Section 05 Tuner Listening to the radio 12 3 4 76 5 These are the basic steps necessary to operate the radio. More advanced tuner operation is explained starting on the next page. 1 Source icon Shows which source has been selected. 2 Band indicator Shows which band the radio is tuned to, AM or FM. 3 Preset number indicator Shows which preset has been selected. 4 Frequency indicator Shows to which frequency the tuner is tuned. 5 Preset list display Shows the preset list. 6 LOCAL indicator Shows when local seek tuning is on. 7 STEREO indicator Shows that the frequency selected is being broadcast in stereo. 1 Touch the source icon and then touch TUNER to select the tuner. 2 Touch the screen to display the touch panel keys. 3 Touch BAND to select a band. Touch BAND repeatedly until the desired band is displayed, FM1, FM2, FM3 for FM or AM. 4 To select a preset channel, touch a preset channel on the list. The preset channel you selected is tuned in. # When the list of channels is not displayed, touch LIST. 5 To perform manual tuning, briefly touch c or d. The frequencies move up or down step by step. # You can also perform manual tuning by pressing c or d button. 6 To perform seek tuning, keep touching c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found. # You can cancel seek tuning by briefly touching either c or d. # If you keep touching c or d you can skip stations. Seek tuning starts as soon as you release the key. # You can also perform seek tuning by pressing and holding c or d button. Note If you do not use the touch panel keys within 30 seconds, they will be hidden automatically. En 25