Pioneer AVHP5700DVD Owner's Manual - Page 68
Introduction of audio, adjustments, Using balance adjustment, Audio Adjustments
UPC - 012562734668
View all Pioneer AVHP5700DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Section 16 Audio Adjustments Introduction of audio adjustments # When selecting the FM tuner as the source, you cannot switch to SLA. # To return to the previous display, touch BACK. # To return to the display of each source, touch ESC. 1 1 Audio display Shows the audio function names. Important If the multi-channel processor (DEQ-P8000) is connected to this unit, the audio function will be changed to the multi-channel processors audio menu. For details, refer to Introduction of DSP adjustments on page 73. 1 Press A.MENU button to display MENU. MENU appears on the display. 2 Touch AUDIO to display the audio function names. The audio function names are displayed and operable ones are highlighted. # To go to the next group of function names, touch NEXT. # To return to the previous group of function names, touch PREV. # If EQ-EX function has been selected and only when EQ-EX is turned on and CUSTOM is selected as the equalizer curve, you can switch to BASS and TREBLE. # Only when the subwoofer controller setting is FULL, NON FADING will be displayed instead of SUB WOOFER. (Refer to Setting the rear output and subwoofer controller on page 89.) Note If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display. Using balance adjustment You can select a fader/balance setting that provides an ideal listening environment in all occupied seats. 1 Touch FAD/BAL on the audio function menu. # When the rear output setting is SUB. W, BAL will be displayed instead of FAD/BAL. Refer to Setting the rear output and subwoofer controller on page 89. 2 Touch a or b to adjust front/rear speaker balance. Each time you touch a or b it moves the front/rear speaker balance towards the front or the rear. FRONT:15 REAR:15 is displayed as the front/ rear speaker balance moves from front to rear. # FR:00 is the proper setting when only two speakers are used. # When the rear output setting is SUB. W, you cannot adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer controller on page 89. 68 En