Pioneer AVHP5700DVD Owner's Manual - Page 89
Adjusting initial settings, Switching the warning tone, Switching the auxiliary setting, Setting
UPC - 012562734668
View all Pioneer AVHP5700DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Initial Settings Section 19 Initial Settings Adjusting initial settings ignition, a warning tone will sound. You can turn off the warning tone. % Touch D. WARN on the initial menu to turn warning tone on. # To turn warning tone off, touch D. WARN again. 1 Initial settings lets you perform initial setup of different settings for this unit. 1 Function display Shows the function names. 1 Touch the source icon and then touch OFF to turn this unit off. # When the source icon is not displayed, you can display it by touching the screen. 2 Press A.MENU button and touch INIT to display the initial function names. The function names are displayed and operable ones are highlighted. # To go to the next group of function names, touch NEXT. # To return to the previous group of function names, touch PREV. # When the multi-channel processor (e.g., DEQP8000) is connected to this unit, you can operate D. ATT and RESET instead of REARSP. # To return to the previous display, touch BACK. # To return to the display of each source, touch ESC. Switching the warning tone If the front panel is not detached from the head unit within five seconds of turning off the Switching the auxiliary setting It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. % Touch AUX on the initial menu to turn auxiliary setting on. # To turn auxiliary setting off, touch AUX again. Setting the rear output and subwoofer controller This units rear output (rear speaker leads output and RCA rear output) can be used for fullrange speaker (FULL) or subwoofer (SUB. W) connection. If you switch the rear output setting to the SUB. W, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp. Initially, the unit is set for rear full-range speaker connection (FULL). When rear output is connected to full range speakers (when FULL is selected), you can connect the RCA subwoofer output to a subwoofer. In this case, you can select whether to use the subwoofer controllers (low pass filter, phase) built-in SUB.W or the auxiliary FULL. ! When the multi-channel processor (e.g., DEQ-P8000) is connected to this unit, you cannot operate this function. En 89