Pioneer AVHP5700DVD Owner's Manual - Page 95
Setting the clock, Selecting video on rear display, Other Functions
UPC - 012562734668
View all Pioneer AVHP5700DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Other Functions Section 20 Other Functions 3 Touch c or d to select the display to open/close automatically or manually. Touch c to select MANUAL, and you have to press OPEN/CLOSE to open/close the display. Touch d to select AUTO, and the display automatically opens/closes when power to this unit is turned on. Setting the clock Use these instructions to set the clock. 1 Touch CLOCK ADJUST on the setup menu. 2 Touch OFF to turn the clock display on. ON will appear in the display instead of OFF. Clock display is now on. # To turn the clock display off, touch ON. 3 Touch c or d to select the segment of the clock display you wish to set. Each time you touch c or d it will select one segment of the clock display: HourMinute As you select segments of the clock display the segment selected will be highlighted. 4 Touch a or b to set the clock. Each time you touch a it increases the selected hour or minute. Each time you touch b it decreases the selected hour or minute. Notes ! You can match the clock to a time signal by touching JUST. If the minute is 0029, the minutes are rounded down. (e.g., 10:18 becomes 10:00.) If the minute is 3059, the minutes are rounded up. (e.g., 10:36 becomes 11:00.) ! Even when the sources are off, the clock display appears on the display. Selecting video on rear display You can set the rear display to automatically switch to the navigation image or AVG-VDP1 with the front display. Alternatively, you can set it to remain showing the selected video source and not change with the front display. ! The navigation image or the AVG-VDP1 can be displayed when a Pioneer navigation unit or a Vehicle Dynamics Processor is connected to this unit. ! When selecting SOURCE and the selected source is an audio source, nothing is displayed on rear display. % Touch R.DISP on the setup menu to display video of the selected source on rear display. Touch R.DISP until the desired video setting appears in the display. ! SOURCE Display the video of the selected source on rear display ! NAVI Display the navigation image or AVG-VDP1 on rear display En 95