Pioneer AVHP5700DVD Owner's Manual - Page 77
Setting the speaker setting, Digital Signal Processor
UPC - 012562734668
View all Pioneer AVHP5700DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Digital Signal Processor Section 17 Digital Signal Processor 3 Touch MUSIC and then touch ADJUST. # You can operate ADJUST only when MUSIC has been selected. 4 Touch a or b to select PANORAMA (panorama). Each time you touch a or b selects the item in the following order: PANORAMA (panorama)DIMENSION (dimension)CENTER WDT (center width) 5 Touch c to turn the panorama control on. # To turn the panorama control off, touch d. 6 Touch b and then touch c or d to adjust front/surround speaker balance. Each time you touch c or d it moves the sound towards the front or the surrounds. +3 3 is displayed as the front/surround speaker balance moves from front to surrounds. 7 Touch b and then touch c or d to adjust the center image. Each time you touch c or d it gradually spreads the center channel sound into the front left and right speakers over a range 07. 3 is the default and its recommended for most recordings. 0 places all center sound in the center speaker. 7 places all center sound equally in the left/right speakers. Setting the speaker setting You need to make with/without (or yes/no) and size (bass reproducing capacity) selection/adjustments depending on the installed speakers. The size needs to be set to LARGE (large) if the speaker is capable of reproducing sounds of about 100 Hz or below. Otherwise select SMALL (small). ! Low frequency range is not output if the subwoofer is set to OFF and the front and rear speakers set to SMALL or OFF. ! It is imperative that non-installed speakers be set to OFF. ! Set the front or rear speaker to LARGE if the speaker is capable of reproducing bass content, or if no subwoofer is installed. 1 Touch NEXT on the DSP function menu. 2 Touch SP SET. 3 Touch a or b to select the speaker to be adjusted. Each time you touch a or b selects the speaker in the following order: FRONT (front speakers)CENTER (center speaker)REAR (rear speakers) SUB WOOFER (subwoofer)PHASE (subwoofer setting) # You can switch to PHASE only when the subwoofer has been set to ON. 4 Touch c or d to select the correct size for the selected speaker. Each time you touch c or d selects the size in the following order: OFF (off)SMALL (small)LARGE (large) # You cannot select OFF, when FRONT (front speakers) have been selected. # You can select ON or OFF, when SUB WOOFER (subwoofer) has been selected. # You can switch REVERSE (reverse phase) or NORMAL (normal phase), when PHASE (subwoofer setting) has been selected. En 77