Pioneer DEH-P5100UB Owner's Manual - Page 26
Adjusting loudness, Using subwoofer output, Audio Adjustments, Adjusting subwoofer settings
UPC - 012562945170
View all Pioneer DEH-P5100UB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Section 03 Audio Adjustments +6 to -6 is displayed as the level is increased or decreased. # You can then select another band and adjust the level. 5 Press BAND/ESC to cancel the 7-band graphic equalizer adjustment. Adjusting loudness Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1 Use MULTI-CONTROL to select Loudness in the audio function menu. Refer to Introduction of audio adjustments on page 24. 2 Press MULTI-CONTROL to turn loudness on. Loudness level (e.g., Mid) appears in the display. # To turn loudness off, press MULTI-CONTROL again. 3 Push MULTI-CONTROL left or right to select a desired level. Each time MULTI-CONTROL is pushed left or right, level is selected in the following order: Low (low)-Mid (mid)-High (high) Using subwoofer output This unit is equipped with a subwoofer output which can be turned on or off. 1 Press SW/BASS to display the subwoofer setting mode. Press SW/BASS repeatedly to switch between the subwoofer setting modes in the following order. SubWoofer1 (subwoofer on/off setting) setting mode-SubWoofer2 (subwoofer setting) setting mode 2 Select SubWoofer1 setting mode. 3 Press MULTI-CONTROL to turn subwoofer output on. Normal appears in the display. Subwoofer output is now on. # To turn subwoofer output off, press MULTI-CONTROL again. 4 Push MULTI-CONTROL left or right to select the phase of subwoofer output. Push MULTI-CONTROL left to select reverse phase and Reverse appears in the display. Push MULTI-CONTROL right to select normal phase and Normal appears in the display. Note You can also switch to this setting mode in the menu that appears by using MULTI-CONTROL. Adjusting subwoofer settings When the subwoofer output is on, you can adjust the cut-off frequency and the output level of the subwoofer. Only frequencies lower than those in the selected range are outputted from the subwoofer. ! When the subwoofer output is on, you can select SubWoofer2. 1 Press SW/BASS to display the subwoofer setting mode. Press SW/BASS repeatedly to switch between the subwoofer setting modes in the following order. SubWoofer1 (subwoofer on/off setting) setting mode-SubWoofer2 (subwoofer setting) setting mode 2 Select SubWoofer2 setting mode. 3 Push MULTI-CONTROL left or right to select cut-off frequency. Each time MULTI-CONTROL is pushed left or right, cut-off frequencies are selected in the following order: 50Hz-63Hz-80Hz-100Hz-125Hz 26 En