Pioneer DEH-P5100UB Owner's Manual - Page 31

Initial Settings Section 04 English Switching the reverse mode If you do not perform an operation for about 30 seconds, screen indications start to reverse, and continue reversing every 10 seconds. 1 Use MULTI-CONTROL to select Reverse mode in the initial setting menu. Refer to Adjusting initial settings on page 28. 2 Press MULTI-CONTROL to turn the reverse mode on. # To turn the reverse mode off, press MULTI-CONTROL again. Note You can also turn on or off reverse mode by pressing BAND/ESC while this unit is turned off. For more details, refer to Reverse mode on page 7. Switching the ever scroll When ever scroll is set to on, CD text information scrolls continuously in the display. Set to off if you prefer the information to scroll just once. 1 Use MULTI-CONTROL to select Ever-scroll in the initial setting menu. Refer to Adjusting initial settings on page 28. 2 Press MULTI-CONTROL to turn the ever scroll on. # To turn the Ever Scroll off, press MULTI-CONTROL again. Activating the BT Audio source You need to activate the BT Audio source in order to use a Bluetooth audio player. ! You can only operate this function when Bluetooth adapter (e.g. CD-BTB200) is connected to this unit. 1 Use MULTI-CONTROL to select BT AUDIO in the initial setting menu. Refer to Adjusting initial settings on page 28. 2 Press MULTI-CONTROL to turn the BT Audio source on. # To turn the BT Audio source off, press MULTI-CONTROL again. Entering PIN code for Bluetooth wireless connection To connect your cellular phone to this unit via Bluetooth wireless technology, you need to enter PIN code on your phone to verify the connection. The default code is 0000, but you can change this in this function. ! With some Bluetooth audio players, you may be required to enter the Bluetooth audio player PIN code in advance to set this unit for a connection. ! You can only operate this function when Bluetooth adapter (e.g. CD-BTB200) is connected to this unit. 1 Use MULTI-CONTROL to select Pin code input in the initial setting menu. Refer to Adjusting initial settings on page 28. 2 Push MULTI-CONTROL up or down to select a number. 3 Push MULTI-CONTROL left or right to move the cursor to the previous or next position. 4 After inputting PIN code (up to 16 digits), press MULTI-CONTROL. PIN code can be stored in memory. When you press MULTI-CONTROL again on the same display, the PIN code you entered is stored in this unit. # Pushing MULTI-CONTROL right in the confirmation display returns you to the PIN code input display, and you can change the PIN code. En 31