Pioneer DEH-P6200BT Owner's Manual - Page 16
Bluetooth Telephone, Operating this unit, Connection menu operation - bluetooth pin
UPC - 884938103145
View all Pioneer DEH-P6200BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Section 02 Operating this unit The playback speed of audiobook can be changed. 1 Press M.C. to display the setting mode. 2 Turn M.C. to select your favorite setting. ! Faster - Playback at a speed faster than normal ! Normal - Playback at normal speed ! Slower - Playback at a speed slower than nor- mal 3 Press M.C. to confirm the selection. S.Rtrv (sound retriever) ! Refer to S.Rtrv (sound retriever) on page 14. Notes ! Operation is complete even if the menu is cancelled before being confirmed. ! Switching the control mode to iPod pauses song playback. Operate the iPod to resume playback. ! The following functions are still accessible from the unit even if the control mode is set to iPod. - Volume - Fast forward/reverse - Track up/down - Pausing - Switching the text information ! When the control mode is set to iPod, operations are limited as follows: - Only CTRL (control mode), Pause (pause) and S.Rtrv (sound retriever) functions are available. - The browse function cannot be operated from this unit. Bluetooth Telephone Connection menu operation Important Be sure to park your vehicle and apply the parking brake when performing this operation. 1 Press and hold PHONE/ /CONNECT to display the connection menu. # You cannot operate this step during a call. 2 Turn M.C. to select the function. After selecting, perform the following procedures to set the function. Device list (connecting or disconnecting a cellular phone from the device list) 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the name of a device you want to connect/disconnect. 3 Press M.C. to connect/disconnect the selected cellular phone. If the connection is established, * is indicated on the device name. Delete device (deleting a cellular phone from the device list) 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the name of a device you want to delete. ! Press and hold M.C. to switch the BD address and device name. 3 Press M.C. to display Delete YES. 4 Press M.C. to delete a cellular phone information from the device list. ! While this function is in use, do not turn off the engine. Add device (connecting a new cellular phone) 1 Press M.C. to start searching. ! To cancel, press M.C. while searching. 2 Turn M.C. to select a device from the device list. ! If the desired device is not displayed, select Search again. 3 Press and hold M.C. to switch the BD address and device name. 4 Press M.C. to connect the selected cellular phone. ! To complete the connection, check the device name (DEH-P6200BT) and enter the link code on your cellular phone. ! PIN code is set to 0000 as the default. You can change this code. Refer to PIN code (PIN code input) on this page. ! If five devices are already paired, Memory full is displayed and it is not possible to perform this operation. In this case, delete a paired device first. 16 En