Pioneer DEH-P6200BT Owner's Manual - Page 18

Section 02 Operating this unit Phone book (phone book) ! The phone book in your cellular phone will be transferred automatically when the phone is connected to this unit. ! Depending on the cellular phone, the phone book may not be transferred automatically. In this case, operate your cellular phone to transfer the phone book. The visibility of this unit should be on. Refer to Visible (setting the visibility of this unit) on the previous page. 1 Press M.C. to display ALPH SRCH (alphabetical list). 2 Turn M.C. to select the first letter of the name you are looking for. ! Press and hold M.C. to select the desired character type. 3 Press M.C. to display a registered name list. 4 Turn M.C. to select the name you are looking for. 5 Press M.C. to display the phone number list. 6 Turn M.C. to select a phone number you want to call. ! When you find a phone number that you want to store in memory, press and hold one of the preset tuning buttons (1 to 6). ! Press one of preset buttons 1 to 6 to recall the desired preset number. 7 Press M.C. to make a call. Dial preset (preset phone numbers) 1 Press M.C. to display the setting mode. 2 Use M.C. to select the desired preset number. Turn to change the menu option. Press to select. ! You can also press one of the preset number buttons 1 to 6 to select a number. 3 Press M.C. to make a call. Phone FUNC (phone function) You can set Auto ANSR and Ring tone from this menu. For details, refer to Function and operation on this page. Function and operation 1 Display Phone FUNC. Refer to Phone FUNC (phone function) on this page. 2 Press M.C. to display the function menu. 3 Turn M.C. to select the function. After selecting, perform the following procedures to set the function. Auto ANSR (automatic answering) 1 Press M.C. to turn automatic answering on or off. Ring tone (ring tone select) 1 Press M.C. to turn the ring tone on or off. Audio Adjustments 1 Press M.C. to display the main menu. 2 Turn M.C. to change the menu option and press to select AUDIO. 3 Turn M.C. to select the audio function. After selecting, perform the following procedures to set the audio function. FAD/BAL (fader/balance adjustment) 1 Press M.C. to display the setting mode. 2 Press M.C. to cycle between fader and balance. 3 Turn M.C. to adjust the speaker balance. Adjustment range (front/rear): F-F15 to F-R15 Adjustment range (left/right): B-L15 to B-R15 ! Select F-0 when only using two speakers. ! When the rear output setting is SUBW, you cannot adjust front/rear speaker balance. Refer to SW control (rear output and subwoofer setting) on page 20. Preset EQ (equalizer recall) 1 Press M.C. to display the setting mode. 2 Turn M.C. to select an equalizer curve. Powerful-Natural-Vocal-Custom1-Custom2-Flat-Super bass ! When Flat is selected no adjustments are made to the sound. 3 Press M.C. to confirm the selection. Graphic EQ (equalizer adjustment) 18 En