Pioneer DEH-P9300 Owner's Manual - Page 36
Adjusting time alignment
View all Pioneer DEH-P9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Audio Adjustments Using time alignment The time alignment lets you adjust the distance between each speaker and the listening position to match the type of car. There are five types of car stored which you can easily recall at any time. 1. Press AUDIO and NEXT and then press T.AL1 to select the time alignment mode. 2. Press the corresponding button to select the type of car. Button SEDAN WAGON M.VAN SUV CUSTM Type of car Sedan Wagon Mini van SUV Custom • "Custom" is an adjusted time alignment that you can create for yourself. Adjusting time alignment For "Custom" time alignment, you can adjust the distance between each speaker and the selected position. 1. Press AUDIO and NEXT and then press T.AL2 to select the time alignment adjustment mode. 2. Press the corresponding button to select a unit of distance. Button cm inch Unit of distance Centimeter Inch 3. Press 2 or 3 to select the speaker to be adjusted. Each press of 2 or 3 selects speakers in the following order: Front Left (front left) Ô Front Right (front right) Ô Rear Right (rear right) Ô Rear Left (rear left) Ô Sub. W (subwoofer) • You cannot select "SUB.W" when the sub- woofer output is off. 4. Press 5 or ∞ to adjust the distance between the selected speaker and the listening position. Each press of 5 or ∞ increases or decreases the distance. • "400.0cm" - "0.0cm" is displayed as the distance is increased or decreased, if you have selected centimeters (cm). • "160inch" - "0inch" is displayed as the distance is increased or decreased, if you have selected inches. • You can adjust the distance for the other speakers in the same way. Note: • "T.AL2" is not displayed when neither "FL" or "FR" is selected in the position selector mode (POSI). If "FL" or "FR" is not selected, "T.AL2" is inactive. Using subwoofer output This product is equipped with a subwoofer output which can be switched on or off. When a subwoofer is connected to this product, turn the subwoofer output on. The subwoofer output phase can be switched between normal and reverse. 1. Press AUDIO and NEXT and then press SW1 to select the subwoofer output mode. 2. Press SW1 to turn the subwoofer output on. "SUB. W ON" appears in the display. • Press SW1 again to turn subwoofer output off. 3. Press 2 or 3 to select the subwoofer output phase. Press 2 to select reverse phase. Press 3 to select normal phase. 35