Pioneer DEH-P9300 Owner's Manual - Page 40
count-down starts. - error 11
View all Pioneer DEH-P9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Audio Adjustments 3. Turn the ignition switch to ON or ACC. If the car's air conditioner or heater is turned on, turn it off. Noise from the fan in the air conditioner or heater may prevent correct auto-equalizing. • Press SOURCE to turn the source on if this product is turned off. 4. Select the position for the seat on which the microphone is placed. Refer to "Using position selector" on page 34. • If no position is selected before you start auto-equalizing, "FL" is selected automatically. 5. Press and hold SOURCE to turn the source off. 6. Press and hold 2 to enter the autoequalizer measurement mode. The front panel opens automatically. • When the source is off, you can check the location of " 2" by turnig on the feature demo. 7. Plug the microphone into the microphone input jack on this product. 9. Get out of the car and close the door within 10 seconds when the 10-second count-down starts. The measurement tone (noise) is output from the speakers, and auto-equalizing (acoustic characteristics measurement and compensation) begins. • When all speakers are connected, auto- equalizing is completed in about four minutes. • To cancel auto-equalizing part way through, press any button. 10.When auto-equalizing is completed, "Complete" is displayed. When correct measurement of car interior acoustic characteristics is not possible, an error message is displayed. (Refer to "Understanding auto-equalizing error messages" on page 49.) 11.Press any button to cancel the autoequalizer mode. 12.Store the microphone carefully in the glove compartment. Store the microphone carefully in the glove compartment or other safe place. If the microphone is subjected to direct sunlight for an extended period, high temperatures may cause distortion, color change or malfunction. 8. Press A.EQ to start the auto-equalizing. 39