Pioneer DEH-P9300 Owner's Manual - Page 46
Matching the time to a time signal, Setting the movie screen
View all Pioneer DEH-P9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Other Functions Matching the time to a time signal 1. Press NEXT to display "CLK". Press NEXT until "CLK" appears. 2. Press CLK and then press JUST to match the time to a time signal. • If the minute is "00" - "29", the minutes are rounded down. (e.g., "10:18" becomes "10:00".) • If the minute is "30" - "59", the minutes are rounded up. (e.g., "10:36" becomes "11:00".) Note: • During date adjustment, "JUST" is not displayed. Changing the display form This product is equipped with two basic displays. You can select the desired display. 1. Press NEXT to display "C.MENU". Press NEXT until "C.MENU" appears. 2. Press C.MENU and then press D.FORM to select the display form mode. 3. Press either FORM1 or FORM2 to select the desired display form. Adjusting the brightness Display brightness adjustment lets you adjust the display for easier viewing when lighting conditions change. 1. Press NEXT to display "C.MENU". Press NEXT until "C.MENU" appears. 2. Press C.MENU and then press BRGHT to select the brightness mode. 3. Press 2 or 3 to adjust the brightness. Each press of 2 or 3 increases or decreases the brightness. • "00" - "31" is displayed as the brightness is increased or decreased. Switching the dimmer setting To prevent the display from being too bright at night, the display is automatically dimmed when the car's headlights are turned on. You can switch the dimmer on or off. 1. Press NEXT to display "C.MENU". Press NEXT until "C.MENU" appears. 2. Press C.MENU and then press DMMER to select the dimmer mode. 3. Press DMMER to turn the dimmer on. "ON" appears on the display. • Press DMMER again to turn the dimmer off. Selecting the wall paper pattern The wall paper pattern is only for display form 2 "FORM2", and there are three patterns to choose from. • When you select "FORM1", "PTRN" is not dis- played and this mode is inactive. 1. Press NEXT to display "C.MENU". Press NEXT until "C.MENU" appears. 2. Press C.MENU and then press PTRN to select the wall paper pattern mode. 3. Press any of the buttons A - C to select the desired pattern. Setting the entertainment display You can change the display to the movie screens, the spectrum analyzer displays, etc., while listening to any source. Setting the movie screen There are four stored movie screens to select from. 45