Pioneer FH-P5000MP Owner's Manual - Page 13
Listening to the radio, Tuner
View all Pioneer FH-P5000MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Tuner Section 04 English Listening to the radio These are the basic steps necessary to operate the radio. More advanced tuner operation is explained starting on the next page. 1 Stereo (5) indicator Shows that the frequency selected is being broadcast in stereo. 2 Band indicator Shows which band the radio is tuned to, AM or FM. 3 Frequency indicator Shows to which frequency the tuner is tuned. 1 Press SOURCE to select the tuner. Press SOURCE until you see Tuner displayed. 2 Use Multi Control to adjust the sound level. Turn it to increase or decrease the volume. 3 Press BAND to select a band. Press BAND until the desired band is displayed, F1, F2, F3 for FM or AM. 4 To perform manual tuning, push Multi Control left or right. The frequencies move up or down step by step. 5 To perform seek tuning, push and hold Multi Control left or right for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found. # You can cancel seek tuning by pushing Multi Control left or right. # If you push and hold Multi Control left or right you can skip stations. Seek tuning starts as soon as you release Multi Control. En 13