Pioneer FH-P5000MP Owner's Manual - Page 22
Selecting the search method, Searching every 10 tracks in, the current disc, Using compression - cd
View all Pioneer FH-P5000MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Section 06 Built-in CD Player 3 Push Multi Control down to turn pause off. Pause:OFF appears in the display. Play will resume at the same point that you turned pause on. Selecting the search method You can switch the search method between fast forward/reverse and searching every 10 tracks. 1 Press FUNCTION to select FF/REV. Press FUNCTION until FF/REV appears in the display. # If the search method ROUGH has been previously selected, ROUGH will be displayed. 2 Push Multi Control left or right to select the search method. Push Multi Control left or right until the desired search method appears in the display. ! FF/REV Fast forward and reverse ! ROUGH Searching every 10 tracks Searching every 10 tracks in the current disc If a disc contains over 10 tracks, you can search every 10 tracks. When a disc contains a lot of tracks, you can roughly search for the track you want to play. 1 Select the search method ROUGH. Refer to Selecting the search method on this page. 2 Push and hold Multi Control left or right to search every 10 tracks on a disc. # If a disc contains less than 10 tracks, pushing and holding Multi Control right recalls the last track of the disc. Also, if the remaining number of tracks after searching every 10 tracks is less than 10, pushing and holding Multi Control right recalls the last track of the disc. # If a disc contains less than 10 tracks, pushing and holding Multi Control left recalls the first track of the disc. Also, if the remaining number of tracks after searching every 10 tracks is less than 10, pushing and holding Multi Control left recalls the first track of the disc. Using compression and BMX Using the COMP (compression) and BMX functions let you adjust the sound playback quality of the CD player. Each of the functions have a two-step adjustment. The COMP function balances the output of louder and softer sounds at higher volumes. BMX controls sound reverberations to give playback a fuller sound. Listen to each of the effects as you select through them and use the one that best enhances the playback of the track or CD that you are listening to. 1 Press FUNCTION to select COMP. Press FUNCTION until COMP appears in the display. 2 Push Multi Control up or down to select your favorite setting. Push Multi Control up or down repeatedly to switch between the following settings: COMP OFFCOMP 1COMP 2 COMP OFFBMX 1BMX 2 Using disc title functions You can input CD titles and display the title. The next time you insert a CD for which you 22 En