Pioneer FH-P5000MP Owner's Manual - Page 44
Using the position selector, Using the time alignment, Digital Signal Processor - car stereo
View all Pioneer FH-P5000MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Section 10 Digital Signal Processor Using the position selector One way to assure a more natural sound is to clearly position the stereo image, putting you right in the center of the sound field. The position selector function lets you automatically adjust the speakers output levels and inserts a delay time to match the number and position of occupied seats. 1 Press DSP to select the position selector. Press DSP until Posi appears in the display. # If the position selector has been previously set to a listening position then the title of that previously selected listening position will be displayed instead of Posi. 2 Push Multi Control left, right, up or down to select a listening position. Direction Display Indicator Position Up Front Front seats Down All All seats Left Right Front-L Front-R Front seat left Front seat right # To cancel the selected listening position, push Multi Control in the same direction again. Using the time alignment The time alignment lets you adjust the distance between each speaker and the listening position to match the type of car. There are five types of car stored which you can easily recall at any time. Here is a list of the types of car: Display SEDAN Wagon Mini-Van SUV Custom Type of car Sedan Wagon Mini van SUV Custom 1 Press DSP to select the time alignment mode. Press DSP until SEDAN appears in the display. 2 Push Multi Control left or right to select the type of car. Each pushing Multi Control left or right selects types of car in the following order: SEDANWagonMini-VanSUV Custom Note Custom is an adjusted time alignment that you can create for yourself. Adjusting the time alignment You can adjust the distance between each speaker and the selected position. ! An adjusted time alignment is memorized in Custom. 1 Press DSP to select the time alignment mode. Press DSP until SEDAN appears in the display. 2 Push Multi Control up or down to select a unit of distance. Each pushing Multi Control up or down will switch between cm (centimeter) and inch (inch) and that status will be displayed. 3 Press DSP to adjust the time alignment. Press DSP until F-L appears in the display. 44 En