Pioneer FH-P5000MP Owner's Manual - Page 42

Section 10 Digital Signal Processor Using the digital signal processor # To return to the display of each source, press BAND. Note If you do not operate the DSP function within about 30 seconds, the display is automatically returned to the source display. The digital signal processor lets you control many aspects of sound output including equalization, sound field control and listening position. 1 Preset equalizer indicator Shows which equalizer preset is currently selected. 2 Position indicator Shows which listening position is currently selected. 3 Custom indicator Shows when custom equalizer curve is currently selected. 4 Function display Shows the function status. 5 BBE indicator Shows when BBE is turned on. % Press DSP to display the DSP function names. Press DSP repeatedly to switch between the following functions: PWRFL (graphic equalizer)50 (13-band graphic equalizer)Posi (position selector) SEDAN (time alignment setting)F-L (time alignment adjusting) SFC (BBE sound) Using the graphic equalizer The graphic equalizer lets you adjust the equalization to match car interior acoustic characteristics as desired. Recalling equalizer curves There are seven stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves: Display S-Bas PWRFL NTRL VOCAL FLAT CTM1 CTM2 Equalizer curve Super bass Powerful Natural Vocal Flat Custom 1 Custom 2 ! CTM1 and CTM2 are adjusted equalizer curves that you create. Adjustments can be made with a 13-band graphic equalizer. ! When FLAT is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between FLAT and a set equalizer curve. 42 En