Pioneer P770MP Owner's Manual - Page 18

Section 04 Tuner 2 Press Multi-Control to turn BSM on. Searching is displayed. While Searching is displayed, the six strongest broadcast frequencies will be stored under preset tuning numbers 16 in the order of their signal strength. When finished, the preset channel list appears. # To cancel the storage process, press Multi-Control. 3 Use Multi-Control to select the desired station. Turn to change the station; press to select. # You can also change the station by pushing Multi-Control up or down. Note Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using buttons 16. Selecting stations from the preset channel list The preset channel list lets you see the list of preset stations and select one of them to receive. 1 Press LIST to switch to the preset channel list mode during the frequency display. 2 Use Multi-Control to select the desired station. Turn to change the station; press to select. # You can also change the station by pushing Multi-Control up or down. # If you do not operate the list within about 8 seconds, the preset channel list mode is cancelled automatically. Tuning in strong signals Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. 1 Use Multi-Control to select Local. Local appears in the display. 2 Press Multi-Control to turn local seek tuning on. Local seek sensitivity (e.g., Level 2) appears in the display. # To turn local seek tuning off, press Multi-Control again. 3 Push Multi-Control left or right to set the sensitivity. There are four levels of sensitivity for FM and two levels for AM: FM: Level 1Level 2Level 3Level 4 AM: Level 1Level 2 The Level 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations. 18 En