Pioneer P770MP Owner's Manual - Page 47

XM tuner Section 10 English 3 Press Multi-Control to select the desired channel select setting. Press Multi-Control repeatedly to switch between the following channel select settings: Channel number (channel number select setting)Category (channel category select setting) # You can also select the XM channel select setting by pressing and holding CLOCK. Selecting the channel in the channel category 1 Select the channel select settings to Category. Refer to Swiching the XM channel select setting on the previous page. 2 Push Multi-Control up or down to select the desired channel category. 3 Push Multi-Control left or right to select the desired channel in the selected channel category. 3 While the input number is displayed, press DIRECT on the remote control. The entered XM channel is selected. Display the ID code Channel number select setting If you select CH : 000, the ID code is displayed. % Push Multi-Control left or right to select CH : 000. Channel category select setting RADIO ID is provided as a channel category for displaying the ID code. % Push Multi-Control up or down to select RADIO ID from channel category. # If you select another channel, display of the ID code is canceled. # Display of the ID code repeats displaying RADIO ID and the ID code one after the other. Selecting the XM channel directly You can select the XM channel directly by entering the desired channel number. ! You cannot operate this mode from func- tion display. 1 Touch DIRECT on the remote control. CHANNEL INPUT appears in the display. 2 Use NUMBER on the remote control to input the desired channel number. # To cancel the input numbers, press CLEAR on the remote control. En 47