Pioneer P770MP Owner's Manual - Page 48
Introduction of audio, adjustments, Compensating for, equalizer curves EQ-EX, Audio Adjustments
UPC - 037459108803
View all Pioneer P770MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Section 11 Audio Adjustments Introduction of audio adjustments 1 1 Audio display Shows the audio adjustments status. 1 Press Multi-Control to display the main menu. FUNCTION, AUDIO and ENTERTAINMENT appear on the display. 2 Use Multi-Control to select AUDIO. Turn to change the menu option; press to select. The audio function name appears on the display. 3 Turn Multi-Control to select the audio function. Turn Multi-Control clockwise to switch between the audio functions in the following order: FAD (balance adjustment)EQ (equalizer curve adjustment)F 80 Q 1W (equalizer curve fine adjustment)Bass (bass and treble level adjustment)Bass (bass and treble frequency adjustment)LOUD (loudness) Sub-W1 (subwoofer on/off setting)/NonFad (nonfading output on/off setting)Sub-W2 (subwoofer setting)/NonFad (nonfading output setting)HPF (high pass filter)SLA (source level adjustment)ASL (automatic sound levelizer) # If EQ-EX function has been selected and only when EQ-EX is turned on and Custom is selected as the equalizer curve, you can switch to Bass. # When the subwoofer controller setting is only Preout :FULL, you cannot switch to Sub-W1. (Refer to page 55.) # You can select the Sub-W2 only when subwoofer output is turned on in the Sub-W1. # When the subwoofer controller setting is only Preout :FULL, you can switch to the nonfading output on/off setting. (Refer to page 55.) # You can select the nonfading output setting only when nonfading output is turned on in the nonfading output on/off setting. # When selecting the FM tuner as the source, you cannot switch to SLA. # To return to the display of each source, press BAND. Note If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display. Compensating for equalizer curves (EQ-EX) The EQ-EX function smoothes the effects of each equalizer curve. Furthermore, you can adjust bass and treble for each source when Custom curve is selected. % Press and hold SW to turn EQ-EX on. EQ-EX ON appears in the display. EQ-EX is now on. # To turn EQ-EX off, press and hold SW. # If you do not operate the EQ-EX within about 8 seconds, the display automatically returned to the source display. 48 En