Pioneer P770MP Owner's Manual - Page 51
Adjusting loudness, Using subwoofer output, Audio Adjustments
UPC - 037459108803
View all Pioneer P770MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Audio Adjustments Section 11 English 3 Push Multi-Control up or down to adjust the level. Each pushing Multi-Control up or down increases or decreases the selected bass or treble level. +6 6 is displayed as the level is increased or decreased. 4 Turn Multi-Control clockwise to select Bass (bass and treble frequency adjustment). Bass appears in the display. # If the treble frequency has been previously adjusted, Treble will be displayed. 5 Push Multi-Control left or right to select the desired frequency. Each pushing Multi-Control left or right selects frequencies in the following order: Bass: 4063100160 (Hz) Treble: 2.5k4k6.3k10k (Hz) Adjusting loudness Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1 Use Multi-Control to select LOUD. LOUD appears in the display. 2 Press Multi-Control to turn loudness on. Loudness level (e.g., Mid) appears in the display. 3 Push Multi-Control left or right to select a desired level. Each pushing Multi-Control left or right selects level in the following order: Low (low)Mid (mid)High (high) 4 To turn loudness off, press Multi-Control again. OFF appears in the display. Using subwoofer output This unit is equipped with a subwoofer output which can be turned on or off. 1 Use Multi-Control to select Sub-W1. Sub-W1 appears in the display. # You can also select the subwoofer setting menu by pressing SW on the unit. # When the subwoofer controller setting is Preout :FULL, you cannot select Sub-W1. 2 Press Multi-Control to turn subwoofer output on. Normal appears in the display. Subwoofer output is now on. # To turn subwoofer output off, press Multi-Control again. 3 Push Multi-Control left or right to select the phase of subwoofer output. Push Multi-Control left to select reverse phase and Rev. appears in the display. Push Multi-Control right to select normal phase and Normal appears in the display. Adjusting subwoofer settings When the subwoofer output is on, you can adjust the cut-off frequency and the output level of the subwoofer. 1 Use Multi-Control to select Sub-W2. Sub-W2 appears in the display. # You can also select the subwoofer setting menu by pressing SW on the unit. # When the subwoofer output is on, you can select Sub-W2. 2 Push Multi-Control left or right to select cut-off frequency. Each pushing Multi-Control left or right selects cut-off frequencies in the following order: 50Hz80Hz125Hz En 51