ProForm Power Zt8 Treadmill English Manual - Page 10

2. Make sure that the power cord is unplugged. Press a Base Cap (74) into each side of the Base (94). Identify the Right Upright (90). Have a second person hold the Right Upright near the Base (94). See the inset drawing. Tie the wire tie in the Right Upright (90) securely around the end of the Upright Wire (81). Then, insert the Upright Wire into the lower end of the Right Upright as you pull the other end of the wire tie out of the Right Upright. 2 Wire 81 Tie 74 81 90 Wire Tie 74 90 3. Lay the Right Upright (90) near the Base (94). 3 Press the Grommet (77) into the square hole in the Right Upright (90). Make sure not to pinch the ground wire. Then, attach the ground wire to the Right Upright (90) with a #8 x 1/2" Silver Screw (10) as shown. 94 94 10 90 77 Square Hole Ground Wire 10