ProForm Power Zt8 Treadmill English Manual - Page 12
Do not press the Base, Covers into place yet., Do not fully tighten, the Screws yet., Attach
View all ProForm Power Zt8 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
6. Identify the Left and Right Base Covers (82, 83). 6 Slide the Left Base Cover onto the Left Upright (89), and slide the Right Base Cover onto the Right Upright (90). Do not press the Base Covers into place yet. Slide the Left and Right Upright Covers (84, 85) onto the Left and Right Uprights (89, 90). 89 84 82 90 85 83 7. There may be ties securing the Cage Nuts (5) in the Handrails (86, 87). Remove the ties and make sure the Cage Nuts are in place. Remove and discard the four indicated screws (B). Hold the Right Handrail (87) near the Right Upright (90). Route the Upright Wire (81) through the bottom of the Handrail and out the front. Attach the Right Handrail (87) to the Right Upright (90) with two 5/16" x 1" Flat Head Screws (28), a 5/16" x 1" Screw (8), and three 5/16" Star Washers (11). Do not fully tighten the Screws yet. Attach the Left Handrail (86) to the Left Upright (89) in the same way. 7 B 86 89 58 11 28 11 B 87 90 5 81 Tie 8 11 12