ProForm Power Zt8 Treadmill English Manual - Page 26
How To Use The Sound System
View all ProForm Power Zt8 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
7. Measure your heart rate if desired. THE SETTINGS MODE See step 6 on page 22. 8. Turn on the fan if desired. The console features a settings mode that keeps track of treadmill information and allows you to personalize console settings. See step 7 on page 23. 1. Select the settings mode. 9. When you are nished exercising, remove the key from the console. See step 8 on page 23. For more information about the iFit mode, go to www.iFit.com. HOW TO USE THE SOUND SYSTEM To select the settings mode, press the Settings button. When the settings mode is selected, the following information will be shown: The time display will show the total number of hours that the treadmill has been used. The distance display will show the total number of miles (or kilometers) that the walking belt has moved. To play music or audio books through the console sound system while you exercise, plug a 3.5 mm male to 3.5 mm male audio cable (not included) into the jack on the console and into a jack on your MP3 player, CD player, or other personal audio player; make sure that the audio cable is fully plugged in. Note: To purchase an audio cable, see your local electronics store. Next, press the play button on your personal audio player. Adjust the volume level using the volume increase and decrease buttons on the console or the volume control on your personal audio player. If you are using a personal CD player and the CD skips, set the CD player on the oor or another at surface instead of on the console. The lower section of the display will show the status of an iFit module. If an iFit module is connected, the display will show the words WIFI MODULE. If a USB module is connected, the display will show the words USB/SD MODULE. If no module is connected, the display will show the words NO IFIT MODULE. 2. Select the optional screens. While the settings mode is selected, the matrix will display several optional screens. Press the decrease button next to the Home button to select each of the following screens: UNITS-To change the unit of measurement, press the Enter button. To view distance in miles, select ENGLISH. To view distance in kilometers, select METRIC. 26