ProForm Power Zt8 Treadmill English Manual - Page 13
and then tighten them.
View all ProForm Power Zt8 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
8. Set the console assembly face down on a soft surface to avoid scratching the console assem- 8 bly. Remove and discard the two indicated Screws (C). Next, lift off the Pulse Crossbar (93). C 9. IMPORTANT: To avoid damaging the Pulse Crossbar (93), do not use power tools and do not overtighten the #10 x 3/4" Screws (9). Orient the Pulse Crossbar (93) as shown. Attach the Pulse Crossbar to the Handrails (86, 87) with four #10 x 3/4" Screws (9) and four #10 Star Washers (92) as shown. Start all four Screws, and then tighten them. 99 92 86 Console Assembly C 93 93 9 92 87 13
13
8.
Set the console assembly face down on a soft
surface to avoid scratching the console assem-
bly. Remove and discard the two indicated
Screws (C). Next, lift off the Pulse Crossbar (93).
C
93
Console
Assembly
C
8
9.
IMPORTANT: To avoid damaging the Pulse
Crossbar (93), do not use power tools and do
not overtighten the #10 x 3/4" Screws (9).
Orient the Pulse Crossbar (93) as shown. Attach
the Pulse Crossbar to the Handrails (86, 87) with
four #10 x 3/4" Screws (9) and four #10 Star
Washers (92) as shown.
Start all four Screws,
and then tighten them.
93
92
9
9
92
86
9
87