ProForm Power Zt8 Treadmill English Manual - Page 18

18. Attach the upper end of the Storage Latch (53) to the bracket on the Latch Crossbar (38) with an 18 M8 x 50mm Bolt (3) and an M8 Nut (12). Lower the Frame (56) (see HOW TO LOWER THE TREADMILL FOR USE on page 28). 56 12 38 3 53 19. Firmly tighten the six 3/8" x 4" Screws (7) (only one side is shown). Press the Left and Right Base Covers (82, 83) onto the Base (94). 19 82 83 7 94 20. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the oor or carpet, place a mat under the treadmill. Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 30 and 31). 18