ProForm Power Zt8 Treadmill English Manual - Page 11

4. Insert a Wheel Spacer (63) into a Front Wheel (62). Hold the Front Wheel inside the bottom 4 of the Right Upright (90), and insert a 3/8" x 4" Screw (7) with a 3/8" Star Washer (13) into the Right Upright and the Front Wheel. Repeat this step with the Left Upright (not shown). 90 13 7 63 62 5. Place a piece of packing material (A) under the right side of the Base (94). Hold the Right 5 Upright (90) against the Base. Make sure not to pinch the Upright Wire (81). Insert two 3/8" x 4" Screws (7) with two 3/8" Star Washers (13) into the Right Upright (90), and partially tighten the three Screws into the Base (94); do not fully tighten the Screws yet. Move the packing material (A) to the left side of the Base (94) and attach the Left Upright (not shown) in the same way. Note: There are no wires on the left side. Remove the packing material (A) from underneath the Base (94). 90 13 7 7 94 A 81 11