RCA DRC8000N User Guide - Page 29

Chapter 3: Using the DVD Recorder's Features Recording from the GUIDE Plus+ on-screen programming guide You can schedule recordings from the GUIDE Plus+ on-screen programming guide (not available for satellite programming). 1. If the program guide isn't on the TV, press the GUIDE button on the remote control (the listings guide appears). 2. Use the remote control's arrow button to highlight the program you want to record. 3. Press the 3 button on the remote. Note:The 3 button corresponds to the GUIDE Plus+ System's action buttons and says record next to it. DON'T press the RECORD button. 4. To change the frequency of the recording (one time, regularly, weekly, etc.), go to the GUIDE Plus+ Schedule menu (see page 32 for more info). Note: If the recording you set up through the GUIDE Plus+ system conflicts with a timer recording that you set up via the DVD Recorder's Recording menu, the Timer recording you set up in the DVD Recorder's Timers menu system will be recorded instead of the one you scheduled through the GUIDE Plus+ system. Add Timer To set a timer for video recording, press OK. To exit, press GO BCK/RETURN Name Channel Day(s) Start Time Stop Time Recording Quality Timers Ch 002 05/19 19 Mon Once 03:00PM 04:00PM *1 : Best Keep Timer Cancel Timer Setting up timer recordings to record programs automatically 1. From the DVD Recorder's main menu, use the remote's arrow buttons to highlight Timers, and press the OK button. 2. If necessary, highlight Add Timer, and press OK (the Timer Setup screen appears). 3. If you want to give the Timer a name, highlight Name and press the INFO button (the on-screen keyboard appears - follow the on-screen instructions to name the timer).When finished entering the name, make sure you press the right arrow button to highlight Done and press OK (highlight moves to Channel). 4. Highlight the Channel field and use the number buttons on the remote to enter the channel number, and press OK (highlight moves to Day). To enter a Video Input Channel, press the right arrow button. 5. Use the number buttons to enter month and day.To change the frequency (once, daily, weekly, etc.), press the right arrow button.When finished, press OK (highlight moves to Start Time). 6. Use the number buttons to enter the time you want to start recording. Press the right arrow button to change the a.m./p.m. setting.When finished, press OK (the highlight moves to Stop Time). 7. Use the number buttons to enter the time you want the DVD Recorder to stop recording. Press the right arrow button to change a.m./p.m. setting. 8. You can change the quality of the recording by pressing the right arrow button.The better the quality, the more space the recording takes up on the disc- less recording time available (go to page 44 for more information). Press OK to confirm the quality recording setting. 9. When you're finished, make sure Keep Timer is highlighted and press OK. Notes:The DVD Recorder's clock must be set in order for Timer Recordings to work properly. For more information about the One-Touch Record feature available via the GUIDE Plus+ System's Schedule menu, go to page 32. Conflicting Timers If you schedule Timer Recordings that overlap, an icon will appear in the list of scheduled Timer Recordings. If a conflict exists, the recording with the earlier starting time takes place.When it ends, the next recording would start, provided there is time left. If you have set up two Timer Recordings for the same time, the one with the lower frequency would be recorded. For example, if one Timer Recording was scheduled to record Weekly and the other was scheduled to record Once, the Timer Recording with Once would be recorded. Graphics contained within this publication are for representation only. 27