RCA DRC8000N User Guide - Page 9

Chapter 1: Connections and Setup Connection: DVD Recorder + TV + Cable Box 2 Way Splitter (provided) RF Coaxial cable Red Yellow White Audio video cables are usually color-coded red, white, and yellow. Red= right audio;White = left audio;Yellow = video. 1. Connect the 2 Way Splitter (provided) to split the cable signal Note: Before you connect the DVD Recorder, you'll need to disconnect some of the cables first in order to re-connect them. 1a. Disconnect the RF Coaxial cable that originates from the cable signal coming into your house, and goes to the cable box. Connect this RF Coaxial cable to the 2 Way Splitter that was packed with your DVD Recorder - connect the cable to the end of the 2 Way Splitter that has only one connector. Note: If you have a digital cable box, you can't use the 2 way splitter provided.You need to purchase a digital splitter. 1b. Use the RF Coaxial cable that was packed with your DVD Recorder, and connect one end to the 2 Way Splitter - connect the cable to the end that has two connectors (it doesn't matter which of the two connectors you use). Connect the other end of this cable to the Cable Signal Input jack (sometimes labeled CABLE IN) on the cable box. 1c. Connect another RF Coaxial cable (not provided) to the cable box's TV Output Jack (sometimes labeled CABLE OUT); and connect the other end to the RF ANTENNA/CABLE INPUT jack on the back of the DVD Recorder. 1d. Connect another RF Coaxial cable (not provided) to the other connector that's available on the 2 Way Splitter. Connect the other end of that cable to your TV's Antenna Input jack (sometimes labeled CABLE/ANTENNA). For more information about the other Input jacks on the back of the DVD Recorder, go to page 54. 2. Connect the DVD Recorder to the TV You need to connect cables to the DVD Recorder's OUTPUT jacks to the TV's INPUT jacks in order to see the content from the DVD Recorder (whether it's a TV program or a disc you're playing). 2a. Connect the audio cables. A set of audio/video cables was packed with your DVD Recorder. Connect the audio cables to the OUTPUT AUDIO L (left - white) and R (right - red) jacks on the back of your DVD Recorder, and to the corresponding Audio Input jacks on your TV (sometimes labeled AUDIO IN L and R). 2b. Connect the video cable.The cables you use for the video determine the quality of the picture you'll see on your TV when you're playing DVDs. For more information about cables and signal quality, go to page 56. Connect the video cable (yellow) to the OUTPUT VIDEO jack on the back of your DVD Recorder, and to the Video Input jack on your TV (sometimes labeled VIDEO IN) S-VIDEO (not shown) If your TV has an S-VIDEO jack, connect one end of the S-Video cable (provided) to the S-VIDEO jack on the back of the TV and the other end to the S-VIDEO OUT jack on the back of the DVD Recorder. COMPONENT OUT Y, Pb, Pr (not shown) If your TV has Component Input Jacks (Y, Pb, Pr), you can achieve even greater picture quality by connecting the DVD Recorder to the TV using these jacks (COMPONENT VIDEO OUTPUT,Y, Pb, Pr on the DVD Recorder). For more explanation, go to page 56. Note: If your TV is capable of progressive scan, connect the DVD Recorder to the TV using the COMPONENT VIDEO OUTPUT jacks, and slide the PROG SCAN switch to the ON position to see DVD titles (movies) in progressive scan format. If you need more explanation, go to page 56. 3. Attach the G-LINK cable to the G-LINK jack. Connecting this cable is necessary in order for you to conduct timer recordings and for the GUIDE Plus+ programming guide to list what TV shows are on. 4. Attach the AC power cord to the unit. 5. Insert the the other end of the AC power cord into an AC outlet (or power strip). Go to page 11 Notes:This connection enables you to watch one channel while you record another channel by splitting the cable signal. If your cable box is necessary for premium channels, you won't be able to access them when watching TV directly (i.e., without going through the DVD Recorder by tuning the TV to its Video Input Channel). Graphics contained within this publication are for representation only. 7