RCA RTD317 RTD317 Product Manual - Page 19

The Info Menu Camera angle (DVD) Creating a Program List for Some discs offer different camera angles for Program Play Mode (Audio specific scenes. 1. To change the camera angle, press the CDs and DVD discs) EN ANGLE button on the remote or press the To use program play mode, you must first INFO button twice and select the Camera create a program list. angle icon with the left/right buttons. 2. Choose the angle with the up/down arrow buttons. 1. To create a program list, press the INFO button three times. Highlight the Play Mode option and press the up arrow to If the disc was recorded using a single camera angle, this function is not available. select the Program option. 2. Press OK. The Program screen is displayed. 3. The first spot in the list is highlighted. Use the number buttons on the remote to Play mode (all discs except mp3/WMA/jpeg) enter a track number. As for DVD discs: T stands for Title while C stands for Chapter. As for Audio CDs: T stands for Track. 1. While the disc is playing, press the INFO button twice for CD and three times for DVD. 2. Select the Play Mode icon using the left/ right arrow buttons. 3. Use the up/down arrow buttons to select an option. 4. Use the arrow buttons to move to the next spot in the list. Enter the next track number. 5. Continue entering tracks until you have completed your list. 6. Highlight the Play option at the bottom of the screen and press OK or press PLAY to start playback. The program list will play • DVD play modes: standard, program, A-B in the order you programmed it. repeat, title repeat, chapter repeat. Program play mode is only available if a program list has been created (see below). Repeat mode is only available with discs that display elapsed time and remaining To stop program play, press STOP or select Standard from the Play Mode option in the INFO display. time. To repeat a sequence between points A and B, choose the A-B repeat option, and then follow the instructions If you want to cancel the list, repeat steps 1 and 2 to select CLEAR and press OK. for entering the two points. • Audio CD play modes: standard, introscan, random, program, repeat A-B, repeat disc, repeat track. 4. To stop repeat playback, select the Play Mode icon and use the up/down arrow buttons to choose the Standard option. Note: • For mp3 play modes, please refer to page 15. 13