RCA RTD317 RTD317 Product Manual - Page 22
Radio
UPC - 044319751321
View all RCA RTD317 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Radio The unit has a built-in tuner that allows for FM radio function. The AM loop antenna EN allows for AM radio function. Manual tuning 1. Connect the FM antenna and the AM loop antenna at the back of the unit. Rotate the AM loop for better reception. 2. Press TUNER. 3. Tune a station by pressing TUNER+/- repeatedly until the desired station is found. Alternatively, you can press and hold the same buttons down for about one second to activate the automatic search function. In this mode the unit will automatically tune frequencies until it finds a station. 4. Repeat step 3 to tune to another radio station. 5. Press TUNER to toggle between FM and AM. Storing radio stations The unit can store up to 30 radio stations in its memory. You can enter every single radio station yourself or the unit can store all available radio stations automatically in ascending order. Automatic preset programming 1. Press TUNER to enter the Tuner mode. 2. Press and hold TUNER for two seconds to start automatic preset programming. 3. Radio frequencies will be browsed and radio stations stored automatically. When all the available radio stations are stored or all 30 memory locations are full, the auto preset programming function will stop. Manual preset 1. Tune to a radio station (see "Manual tuning" for details). 2. Press MEMORY. While the Program Preset number is still flashing, input your desired preset number using the numeric buttons or press the CH+/- buttons, then press MEMORY to store it. Retrieving preset stations 1. Press TUNER to enter the Tuner mode. 2. Press CH +/- to search up or down for the preset stations or directly press the numeric buttons. Tips: • When the FM station broadcasts Stereo sound is found, ST is displayed. • When you manually tune into a weak FM station, press AUDIO on remote control to switch from Stereo to Mono mode. This will reduce the background noise. • If there is any interference, change the antenna's position until ideal sound reception is obtained. TV and other electronic devices could be the cause of interference, so try to position the antenna away from them. • A weak signal can affect the "Automatic preset programming" function's efficiency. Adjust the antenna for better reception and a more efficient search. 16