Ricoh Aficio MP 2000 Scanner Reference - Page 117
When Scanning Originals of Mixed Sizes Using TWAIN Scanner, Auto detectMixed-size, Original Size
View all Ricoh Aficio MP 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
❖ ADF/ARDF Original Orientation top edge of original placed first Scan Settings When Using Twain Scanner TWAIN Scanner Control Dialog Box Key top edge touches rear of ADF/ARDF Note ❒ Originals are normally rectangular ( ) or horizontally long ( ). However, the table above uses squares to make original orientation easier to understand. Even if the actual shape of the original is different, the combination of original orientation and the orientation specified on the scanner driver does not change. 5 ❒ For details about the Scanner Control dialog box, see the TWAIN driver Help. ❒ Depending on the settings, originals of different sizes are scanned differently. When Scanning Originals of Mixed Sizes Using TWAIN Scanner This section describes differences you need to be aware of when using the TWAIN scanner to scan originals of the same width but different length, such as A3&A4 or B4&B5. • If [Auto detect(Mixed-size)] is selected in the [Original Size:] list, the machine detects the length of each same-width original and then scans them. • If [Auto detect(Uni-size)] is selected in the [Original Size:] list, the machine detects the size of the first original of the batch and scans all subsequent originals at that size. 111