Ricoh Aficio MP 2500 Facsimile Reference - Page 58
Sending by IP-Fax, Start, Clear Modes, Enable H.323, H.323 Settings, Enable SIP, SIP Settings
View all Ricoh Aficio MP 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Transmission B Enter the fax number using the number keys. 1 C Press [Tone]. D Enter the number you want to tone dial using the number keys. E Press the {Start} key. The transmission starts. If you want to cancel a transmission, press the {Clear Modes} key, and then remove the originals. After transmission, the standby display appears. Note ❒ Certain services may be unavailable even when using the Tone function. ❒ A tone is shown as a "T" on the display and the next numbers are dialed using tonal signals. Sending by IP-Fax This section explains how to specify a destination using IP-Fax transmission. When using IP-Fax transmission, specify the IP-Fax destination (IPv4 address, host name, or alias telephone number) in place of the fax number. Important ❒ To use IP-Fax functions, the optional printer/scanner unit must be installed. ❒ To send an IP-Fax document, in the Fax Features menu, configure the IP-Fax Settings as follows. For details about IP-Fax Settings, see "Fax Features", General Settings Guide. • If you are using a gatekeeper server, set [Enable H.323] to [On] and configure the gatekeeper settings under [H.323 Settings]. • If you are using a SIP server, set [Enable SIP] to [On] and configure the SIP server settings under [SIP Settings]. 48