Samsung DV457EVGSGR/A1 User Manual Ver.1.0 (English, French, Spanish) - Page 20
Connecting The Inlet Hose
View all Samsung DV457EVGSGR/A1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Installing your dryer CONNECTING THE INLET HOSE Method 1 The dryer must be connected to the cold water faucet using the new inlet hoses. Do not use old hoses. 1. If space permits, attach the brass female end of the "Y" connector to the cold water faucet. 2. Turn the cold water faucet off. 3. Attach the straight end of long hose to the "Y' connector. 4. Using pliers, tighten the coupling with an additional two- thirds turn. Do not overtighten, as this may damage the coupling. 5. Attach the angled end of long hoses to fill the valve at the bottom of the dryer's rear frame. Screw on the coupling by hand until it is seated on the fill valve connector. 6. Using the pliers, tighten the coupling with an additional twothirds turn. Do not overtighten, as this may damage the coupling. 7. Check that the water faucets are on. 8. Check for leaks around the "Y" connector, faucets and hoses. Y-Connector Water Hose Duct Exhaust Frame (back) Water Hose 20_ Installing your dryer DV457E1_02836J-04_EN.indd 20 2013-08-08 4:25:37