Samsung DV457EVGSGR/A1 User Manual Ver.1.0 (English, French, Spanish) - Page 25
Final Installation Checklist, Dryer Exhaust Tips
View all Samsung DV457EVGSGR/A1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
01 INSTALLING YOUR DRYER FINAL INSTALLATION CHECKLIST • the dryer is plugged into an electrical outlet and is properly grounded. • The exhaust ductwork is hooked up and the joints are taped. • A plastic flexible duct is NOT used. • Use rigid or stiff-walled flexible metal vent material. • The dryer is level and is sitting firmly on the floor. • Gas models - the gas is turned on with no gas leaks. • Start your dryer to confirm that it runs, heats, and shuts off. DRYER EXHAUST TIPS A plastic or non-metal flexible duct presents a potential fire hazard. WARNING 1. Make sure your dryer is installed properly so it exhausts air easily. Dryer Wall Duct Exhaust 2. Use a 4" diameter rigid metal duct. Tape all joints, including at the dryer. Never use lint-trapping screws. 4" Tape Duct 3. Keep ducts as straight as possible. 4. Clean all old ducts before installing your new dryer. Be sure the vent flap opens and closes freely. Inspect and clean the exhaust system annually. Don't let a poor exhaust system slow the drying process by: • Restricting your dryer with a poor exhaust system. • Using a plastic, thin foil, or non-metal flexible duct. • Unnecessarily using long ducts that have many elbows. • Allowing dented or clogged ducts and vent. DV457E1_02836J-04_EN.indd 25 Installing your dryer _25 2013-08-08 4:25:37