Samsung DV457EVGSGR/A1 User Manual Ver.1.0 (English, French, Spanish) - Page 46

Vent Sensor

Page 46 highlights

Drying a load of laundry VENT SENSOR Your Samsung dryer is equipped with a Vent Sensor, which detects and notifies you when it is time to clean the ductwork. Keep your dryer safe and efficient by cleaning the ducts when prompted. The Vent Sensor detects any duct blockages You can figure out whether there is a duct blockage from the message below the process bar. Level Message Status Solution 0 No message The ductwork is free from blockages. 1 Check for vent When a part of the duct Check the duct blockage after cycle or the lint filter is blocked connection, shorten the completes. by lint or a foreign object. duct, or straighten it if When the resistance is necessary. high because the duct is Check the lint filter or too long or bent. the duct and clean it if necessary. 2 Vent is blocked. When the duct is blocked Check the duct Do not continue without by lint or a foreign object. connection, shorten the checking vent.1) When the resistance is duct, or straighten it if very high because the necessary. duct is too long or bent Check the lint filter or the excessively. duct and clean it as soon as possible. 1) In the LEVEL 2 state, this message is displayed for 3 hours after the completion of the cycle. (If the wrinkle prevention function is activated, this message is displayed for up to 3 hours.) If the power button is pressed or the door is opened, the power is immediately turned off. For more information about the duct installation, please refer to the "Ducting requirements" section on page 14. • Although the dryer is available even if the blockage message is displayed, the drying time may be extended. • If the LEVEL 1 message is displayed the first time the dryer is run after installation, check the connection and clean the duct. If the LEVEL 1 message appears even after you have checked and cleaned the ducts, this may indicate that there are some restrictions of the duct due to the length, condition, etc.. If this occurs, you can use the dryer normally and no countermeasures need to be taken. However, the drying time may be extended or the drying performance may be degraded 46_ Drying a load of laundry DV457E1_02836J-04_EN.indd Sec3:46 2013-08-08 4:25:44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216

46
_ Drying a load of laundry
Drying a load of laundry
VENT SENSOR
Your Samsung dryer is equipped with a Vent Sensor, which detects and notifies you when it is time to clean
the ductwork. Keep your dryer safe and effi
cient by cleaning the ducts when prompted.
The Vent Sensor detects any duct blockages
You can figure out whether there is a duct blockage from the message below the process bar.
Level
Message
Status
Solution
0
No message
The ductwork is free from
blockages.
-
1
Check for vent
blockage after cycle
completes.
When a part of the duct
or the lint filter is blocked
by lint or a foreign object.
When the resistance is
high because the duct is
too long or bent.
Check the duct
connection, shorten the
duct, or straighten it if
necessary.
Check the lint filter or
the duct and clean it if
necessary.
2
Vent is blocked.
Do not continue without
checking vent.
1)
When the duct is blocked
by lint or a foreign object.
When the resistance is
very high because the
duct is too long or bent
excessively.
Check the duct
connection, shorten the
duct, or straighten it if
necessary.
Check the lint filter or the
duct and clean it as soon
as possible.
1)
In the LEVEL 2 state, this message is displayed for 3 hours after the completion of the cycle. (If
the wrinkle prevention function is activated, this message is displayed for up to 3 hours.)
If the power button is pressed or the door is opened, the power is immediately turned off.
For more information about the duct installation, please refer to the “
Ducting requirements
section on page
14
.
Although the dryer is available even if the blockage message is displayed, the drying time
may be extended.
If the LEVEL 1 message is displayed the first time the dryer is run after installation, check
the connection and clean the duct. If the LEVEL 1 message appears even after you have
checked and cleaned the ducts, this may indicate that there are some restrictions of the
duct due to the length, condition, etc.. If this occurs, you can use the dryer normally and
no countermeasures need to be taken. However, the drying time may be extended or
the drying performance may be degraded
DV457E1_02836J-04_EN.indd Sec3:46
DV457E1_02836J-04_EN.indd
Sec3:46
2013-08-08
4:25:44
2013-08-08
4:25:44