Samsung HLN437W User Manual (ENGLISH) - Page 34

Special Features Selecting a Signal Source (Antenna or Cable) for PIP If the PIP source is TV during PIP ON, you can select the broadcasting source of PIP picture separately from the main picture. (If the main picture is ANT-B and the broadcasting sources are different, making adjustments is necessary.) 1 Press the Menu button. Move the joystick down to select PIP, then press the joystick to enter. 2 Move the joystick down to select "Air or CATV". 3 If an antenna is connected, the setting is "AIR." If a Cable TV system is providing the signal, move the joystick to the left or right until the appropriate type of cable system is displayed ("STD," "HRC," or "IRC"). 4 Press Menu to exit. 66 Swapping the Contents of the PIP and Main image 1 Press the Menu button. Move the joystick down to select PIP, then press the joystick to enter. Quick way to access PIP Swap: Just press "Swap" on the remote control. 2 Move the joystick down to select "Swap". 3 Move the joystick to the right or left. The channel in the PIP image will appear in the main image, and vice versa. 4 Press Menu to exit. NOTE • When ANT-B, Component mode, PC, or DVI is selected, the PIP Swap function doesn't work. 67