Samsung HLN437W User Manual (ENGLISH) - Page 41

PC Display Display Modes Mode Resolution Total Hor. Freq Polarity Ver. Freq Polarity Pixel Clock Sep Com SOG VGA 640x350 800x449 31.47 kHz P 70.00 Hz N 25.175 MHz 0 0 x 720x400 900x449 31.47 kHz N 70.00 Hz 28.322 MHz 0 0 x 720x400 936x446 37.93 kHz N 85.00 Hz P 35.5 MHz 0 0 x 640x480 800x525 31.47 kHz N 60.00 Hz P 25.175 MHz 0 0 x 640x480 864x525 35.00 kHz N 66.70 Hz N 30.24 MHz 0 0 x 640x480 832x520 37.86 kHz N 72.80 Hz N 31.5 MHz 0 0 x 640x480 840x500 37.50 kHz N 75.00 Hz N 31.5 MHz 0 0 x 640x480 832x509 43.27 kHz N 85.00 Hz N 36 MHz 0 0 x SVGA 800x600 1024x625 35.16 kHz N/P 56.30 Hz N 36 MHz 0 0 x 800x600 1056x628 37.88 kHz P 60.30 Hz N/P 40 MHz 0 0 x 800x600 1040x666 48.08 kHz P 72.20 Hz P 50 MHz 0 0 x 800x600 1056x625 46.87 kHz P 75.00 Hz P 49.5 MHz 0 0 x 800x600 1048x6321 53.67 kHz P 85.10 Hz P 56.25 MHz 0 0 x 832x624 1152x667 49.73 kHz N 74.60 Hz P 57.284 MHz 0 0 x XGA 1024x768 1344x806 48.36 kHz N 60.00 Hz N 65 MHz 0 0 x 1024x768 1328x806 56.40 kHz N 70.10 Hz N 75 MHz 0 0 x 1024x768 1312x800 60.02 kHz P 75.00 Hz N 78.75 MHz 0 0 x DTV 1920x1080i 2200x1125 33.75 kHz X 60.00 Hz P 74.25 MHz 0 x x 1280x720p 1650x750 45.00 kHz X 60.00 Hz X 74.25 MHz 0 x x 720x483p 858x525 31.47 kHz X 60.00 Hz X 27 MHz 0 x x NOTE Both screen position and size will vary, depending on the type of PC monitor and its resolution. The table above shows all of the display modes that are supported: * The interlace mode is not supported. * The TV will operate abnormally if a non-standard video format is selected. NOTES • When this TV is used as a PC display, 32-bit color is supported (over 16 million colors). • Your PC display screen might appear different, depending on the manufacturer (and depending on your particular version of Windows). Check your PC instruction book for information about connecting your PC to a TV display-monitor. • Same modes as PC are supported for the signal input to the DVI jack. Only a separate sync signal is supported. 80 How to Set up Your TV as a PC display "Auto Adjust" allows the TV to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically. 1 Press TV/VIDEO on the remote control. Move the joystick up or down to select PC, then press the joystick to enter. 2 Press the Menu button. Move the joystick down to select "PC", then press the joystick to enter. 2 Move the joystick down to select "Auto Adjust". 3 Press the joystick to enter. 81